contestada

Mark this question for review To answer this question, complete the lab using information below. Launch Lab You are setting up on a small network. The owner of the network has decided to change his internet service provider (ISP) to EtherSpeed. The ISP has installed a connection to both RJ45 jacks on the wall plate. You are responsible for selecting the correct router to connect the network to the internet. You want to use the fastest connection speed available while maintaining security for the Home-PC and Home-PC2 computers. In this lab, your task is to complete the following: Use the appropriate network components to connect the two computers to the new ISP. • Place the Ethernet router with firewall capabilities on the Workspace. • Use the existing Cat5e Ethernet cables to connect the computers to the router's integrated Ethernet LAN ports. Use the AC to DC power adapter to plug in the device. • Use the Network and Sharing Center on both computers to confirm that the computers are properly connected to the network and internet. In this lab, the networking devices are preconfigured with the correct settings to make the connection to the internet service provider (ISP) and the internet.

Respuesta :

Martebi

The appropriate network components steps to take to connect the two computers to the new ISP is given below.

What is the network components  about?

In carryout the above task, the first thing to do is click the Shelf, and widen the Networking Devices.

Other steps are:

  • Take the Ethernet router and firewall to the Workspace.
  • Beyond the router, Click on Back to switch and change to the back view.
  • Beyond the switch, Click on Back to switch to change to back view of the switch.
  • Beyond the cable modem, change by clicking on Back to switch to the back view as seen on the cable modem.

Later on click  on the Ethernet cable as found on the third switch port and then extend it to an open Ethernet LAN port on the router to link up the Home-PC down to the router.

Click also on the Ethernet cable as seen the third switch port and then take it also  to an open Ethernet LAN port as seen on the router to link up the second Home-PC to the router.

Then also click on the last Ethernet cable on the switch and extend (drag) it to the open Ethernet WAN port as seen on the router to link up the router to the internet service.

Then click the Ethernet cable on the cable modem and extend it to a single of the RJ45 ports that can be found by going to the wall plate.

Make sure to select the DC power connector that can be seen on the switch and extend it to the power port seen on the router so that one can plug in the router.

Looking at the Home-PC, select to view Windows 10 to see if the system is properly linked to the network and also the internet.

Go to the notification aspect and the select the Network icon and click on the tool called Open Network and Sharing Center.

Lastly, One can know if the connection to Home-PC2 is working by clicking on bench as seen in the top menu, and then select to see Windows 10 to know if it is well linked to the network and internet and also follow the notification steps above.

Learn more about  network components from

https://brainly.com/question/20535662

#SPJ4

Otras preguntas